Yarda kaya da hannunka

Katin da ake amfani da shi yana iya yin mahimmanci da hannunsa don kowane hutu, saboda wannan ya isa ya san fasaha na samar da abubuwa masu mahimmanci kuma yana da kyakkyawan tunanin.

A cikin wannan labarin, zamu dubi wasu 'yan kundin kwarewa, daga abin da za ku koyi yadda ake yin akwatuna a cikin ƙirar ƙaddara.

Jagora Jagora 1: Katin ranar soyayya

Zai ɗauki:

• katako mai haske;
• Cika takarda don dukkanin tabarau na ja;
• kayan aiki don gwaninta;
• PVA manne.

1. Muna motsa manyan nau'o'i daban-daban, dole ne mu gyara ƙarshen tare da manne, don haka kada mu yi fure.
2. Muna haɗe su a cikin nau'i na zuciya a kan madauri a cikin rabin kwali.

Jagoran Jagora 2: Katin Sabuwar Shekara

Zai ɗauki:

• tube don ɗaukar 3mm a launi daban-daban;
• PVA manne;
• kayan aiki don gwaninta;
• kwandon haske.

1. Daga ratsan ratsan ratsi mai iska (adadin ya dogara da girman girman zuciya), don itacenmu ya isa ga 10pcs. Daga bakar fata ko launin ruwan kasa 1 mirgine.
2. Danna su a gefe ɗaya, muna ba su wata siffar digo.
3. A cikin kwali mai ladabi a rabi, za mu fara hada man ƙananan tayi na itacen, wanda ya kunshi abubuwa 4. Mataki na gaba, wanda yake kunshe da abubuwa 3, an haɗa shi, dan kadan zuwa lakabin farko. Sabili da haka zuwa saman.
4. Daga ƙasa da itacen fir, a tsakiya mun haɗa manya.
5. Ana haifar da bishiyar Kirsimeti tare da mintuna masu launuka daban-daban, suna gluing su a kan bishiyar Kirsimeti.
6. Ya rage don zuwan fatar snowflakes da taya murna.

Irin wannan katin rubutu ya dace don yin tare da yara.

Jagoran Jagora 3: katin gidan waya a cikin ƙaddamar da ƙaddara "Daga Fabrairu 23"

Zai ɗauki:

• takardar farar fata na katako;
• launi takarda don cikawa;
• almakashi, manne, tootot.

1. Farin fata ya lanƙwasa don haka gefen gefe ya yi. Rubuta lambar 2 a wani sashi, da 3 a daya kuma yanke su a kan iyakar baki.
2. Muna yin 'yan wasa kyauta: iska a kan hakori, shimfiɗaɗa kaɗan kuma gyara karshen tare da manne.
3. Mun rataya kayan da aka karɓa a cikin siffofin, ba su da siffar da ake bukata.
4. Mun rataya wani tauraron ja a kan katin rubutu kuma ya shiga.

Don haka zaka iya yin katin gidan waya tare da kowane lambar don taya maka murna a ranar haihuwarka.

Jagoran Jagora 4: katin aure a ƙaddamar da fasaha

Zai ɗauki:

• rawaya da ruwan hoda mai kwaskwarima guda biyu;
• Rufta takarda (3 da 10 mm fadi);
• scissors, toothpick, PVA manne da kuma sparkles.

1. Ninka zanen kwalliya a cikin rabi, kuma daga ruwan hoda - yanke dutsen da kuma manna shi a tsakiyar rawaya.
2. An zana mintuna mai launin mintuna 10 mm a cikin rabi tare da aljihunan gashi kuma mun manna gawar da aka samo a sama da kasa na square.
3. Daga takarda takarda mu yanke layi tare da aljihunan da aka zana, kuma daga takarda mai launi - kyautar da aka buga da manna akan katako mai ruwan hoda.
4. Daga takarda takarda muna yin: 6 rawaya da kore a cikin nau'i na juji da 12 a cikin nau'i mai tsinkaye.
5. Don yin fure, za mu fara motsa iska mai zurfi 10 mm kamar yadda ya saba, kuma ta hanyar
6. 10-15 mm, mun lanƙantar da ɓangare na tsiri ta digiri 90. Guddawa da kunnen doki don haka, muna yin fitilar girman da muke bukata. A ƙarshen tsiri, dole ne a glued gefen. Muna yin ta wannan hanya da dama da wardi daban-daban da kuma masu girma.
7. Gluing green crescents a biyu, mu yi petals.
8. Mun rataye takalmin da aka samu a kwali, kuma a saman fure.
9. Na gaba, mun hade kore sauyi a cikin fure.
10. Sauran sassan suna glued kamar yadda aka nuna a cikin hoto.
11. Daga ratsan ratsi mai haske 3 mm fadi, muna yin 12 a cikin gilashi kuma ƙara katin rubutu.
12. A saman dukkanin abubuwa, muna amfani da manne tare da launi a sautin. An shirya katin mu.

Kayan aiki na iska da iska, wanda aka yi a cikin kayan aiki da hannuwansu, ya cika cikakkiyar kyautar don kowane hutu.

A cikin ƙaddamar da fasaha, zaka iya ƙirƙirar siffofi masu ƙari, misali, gungu na inabõbi , wardi da kuma amfani da su don tsara zane-zane.