Gilashin gilashin kwalban kwalba

A lokacin rani, kusan kowace rana muna saya kwalban ruwa. Daga irin wannan abu mai sauƙi, zaka iya yin farin ciki ga yaro ko ainihin weathervane da hannuwanka . Ana fitar da takalma daga takarda ko kwalabe filastik a hanyoyi daban-daban. Ba ya daɗe, kuma yaron zai kasance da sha'awar shiga cikin tsari da wasa.

Dakatar da shafuka daga kwalabe

Don aikin da muke bukata:

• tsaftace kwalban lita biyu;
• masu launin insulating tef;
• almakashi;
• centimeter;
• wuka mai kwalliya;
• ball tare da yunkurin hawa (wanda ake amfani da shi don kama kifi).

Yanzu la'akari da umarni mai sauƙi a mataki-mataki.

1. An cire gilashi sosai kuma an cire duk takalman.
2. Kusan a cikin tsakiyar launi launi mun hada manoma. Tare da taimakonsa, zaka iya ɓoye maɓallin manne daga wrapper. Ya kamata a yi amfani da tefurin kawai zuwa madaidaicin kwalban.
3. Yin amfani da siginan sifa daya daidai kuma zana hanyoyi tsaye. Rassan sunyi kusan ɗaya da rabi centimeter a fadin.
4. Sa'an nan kuma, tare da wutsiyar wanen waya, fara da hankali daga sama zuwa kasa. Yi kokarin gwadawa daidai tare da layin, in ba haka ba a karshen ba za ka sami sakamako mai sa ran ba.
5. Nisa daga ƙasa ya zama akalla 2 cm.
6. Yanzu dan dan dannawa latsa kayan aiki na masu launin filastik. Yi amfani da "haskoki" a hankali.
7. Yanzu wadannan "haskoki" suna buƙatar a ba da siffar daidai don iska ta iya juya mai juyayi daga kwalban filastik. Don yin wannan, kowanne "ray" ya durƙusa a wani kusurwa na 45 ° a mafi girman matsayi.
8. Muna yin wannan a mafi ƙasƙanci, amma a cikin wani shugabanci.
9. Yanzu ya kasance yana yin ado da kayan kwalbanmu daga kwalabe na filastik tare da maɗauran lantarki.
10. Domin a rataya turbulen, a cikin murfi mun yi rami kuma mu saka maɗauri a can. Mun wuce madauki daga wani waya.
11. An shirya shirye-shirye

Yaya da sauri don yin turbuwa daga kwalban?

Wani fasali na al'ada a kan wani madauri ko sanda a cikin nau'i mai sauƙi ya zama ma sauƙi. Don yin wannan, kana buƙatar:

• babban m kwalban;
• Alamar alama da kuma wanen ɗan kwance;
• Paint.

1. Domin yin sautin daga kwalban filastik, cire takarda da raba shi cikin sassa guda biyar. Mun zana hanyoyi a tsaye. Sashe na sama, inda fararen fuska fara farawa, an yanke. A cikin hoton, iyakar ta nuna ta hanyar layi.
2. Cire ɓangare na sama kuma ya yanke ruwan wukake. A kowane ɓangare da ke ƙasa suna alamomi guda ɗaya.
3. Yanzu muna jawo kowane ruwa tare da layin daga alamar zuwa tushe.
4. Muna tanƙwara kowace ƙwayar ta wannan hanya kuma ta ɗaga rami domin mu gyara matsayinsa a nan gaba.
5. Yin amfani da gun bindiga, haša jirgi daga kwalban zuwa tsakiyar aikin aiki kuma zaɓi ramin don gyara turntable ga goyon baya.
6. Mun shafe aikin da aka shirya.

Gilashi mai laushi daga kwalban filastik

Ƙarin bambancin da ya fi rikitarwa ya shafi yin amfani da kwalabe filaye da dama a yanzu. Irin wannan waƙa ana sakawa akan

• dabarun gonar. Don aikin yana wajibi ne a shirya:
• biyu kwalabe filastik;
• hudu;
• uku manyan beads;
• kaya, almakashi, waya.

Ka yi la'akari da kwarewa a mataki-mataki-mataki, yadda za ka iya yin lalata turntables daga kwalabe na filastik.

1. Yanke kwalban a cikin rabi tare da zane-zane ko zane.
2. A yanzu mun yanke ruwan wutan lantarki da almakashi.
3. Muna tanƙwara da yatsun a wani kusurwa na 45 ° a tsakiyar tsayin ko a tushe.
4. Wannan shine tsarin kasuwancin mu kamar wannan mataki.
5. Yi hankali a hankali da ruwan wukake.
6. A tsakiyar fuka-fuki da murfin munyi ramuka.
7. Muna launi blanks ta amfani da zane na fenti.
8. Adhesive gun fastens da lids zuwa kasan da ruwan wukake.
9. Mun wuce waya a cikin ƙyan.
10. Muna tattara gilashin iska: a kan igiya na waya guda ɗaya, to, ƙofar ta biyu da kuma karin kayan aiki.
11. Ƙungiyoyi sun rusa sauran waya, ta hanyar gyara tsarin.
12. Miki yana shirye!